What Is the Aluminum Patio Door Installation Process?
The aluminum patio door installation process at Love That Door runs from a free consultation through a final walk-through inspection, typically inside one to two days for a standard opening and a bit longer for large bifold or lift-and-slide systems. Our in-house crews handle everything, so the aluminum patio doors that leave our factories are installed exactly as they were engineered. We also manage permits and inspections, then walk the finished job with you before we consider it complete.
How Do I Start an Aluminum Patio Door Installation Project?
Love That Door®
You begin with a free consultation. Schedule your consultation online, or stop into one of our four DFW showrooms in Dallas, Frisco, Fort Worth, or Grapevine to touch the glass and test the hardware. Pulling the panels open on German-engineered hardware makes the whole decision easier.
- We review the opening size, operation style, and finish.
- We match you to the right system: bifold, lift-and-slide, panoramic, or aluminum windows.
- We run the glass package and hardware options so the quote matches your home.
From there one licensed project coordinator handles measurement, code, and scheduling. It is a turnkey project, so you deal with one manufacturer and one crew from design to the final inspection.
Does Love That Door Handle Permits and Inspections?
Yes. Permits and inspections are part of our full turnkey service, and that matters because the rules differ by city. Our four DFW teams file the paperwork and schedule the sign-off so nothing is left to chance. For details applying to your zip code, read our install inspection guide.
A project manager verifies what your municipality requires, submits the application, arranges the inspection, and coordinates timing. We close out the permit with you and hand over the paperwork.
📉 Related Content →
Thermally broken aluminum doors for Texas
How bifold door hardware works
Book your FREE in-home or showroom consultation today—we'll measure your space, explore custom designs, and bring your vision to life!
Get a FREE quote! Share your measurements or a photo of your space, and our design experts will send you a personalized price estimate.
What Happens During the Pre-Installation Measurement?
A field specialist takes precise measurements of the opening: finished floor height, header condition, wall backing, and exact width at the top, middle, and bottom. These numbers keep a heavy aluminum panel from sagging later.
- We confirm the studs and blocking so large panels hang square.
- We check threshold height and the water-management plan.
- We note the operating direction of a lift-and-slide and leaf count of a bifold.
Because we fabricate to the measured spec, the door that shows up matches your opening.
What Happens on Installation Day?
The crew arrives with panels still factory-wrapped and inspects the delivery before anything opens. A standard aluminum patio door usually fits the same day.
- We remove and dispose of the old door and frame.
- We inspect the underlying rough opening and repair anything needed.
- We check each panel’s glass, frame, and hardware before setting.
- We install every panel on German-engineered hardware and level it.
- We finish the threshold, weather seal, and exterior caulk.
We install only doors we manufactured, so the process is repeatable. See how bifold door hardware works.
What Materials and Glass Go Into the Installed Door?
Every aluminum patio door we install uses a thermally broken aluminum frame with bends engineered into the extrusion, plus a 1-inch double-paned glass package. Our crew verifies it stays intact to the finished wall.
- Thermally broken frames with engineered bends for insulation.
- 1-inch insulated glass, argon-filled, Low-E, and tempered as standard.
- German-engineered hardware certified for the system weight.
Read the full breakdown in our aluminum patio door performance guide.
How Long Does an Aluminum Patio Door Install Take?
Most single-opening patio doors finish in one day. Large bifolds or wide lift-and-slide units need about two days because each module is aligned twice.
- Standard aluminum patio door: same-day.
- Bifold up to several leaves: one to two days.
- Lift-and-slide or panoramic systems: two days.
Because in-house crews install only our own doors, the schedule is reliable.
Book your FREE in-home or showroom consultation today—we'll measure your space, explore custom designs, and bring your vision to life!
Get a FREE quote! Share your measurements or a photo of your space, and our design experts will send you a personalized price estimate.
What Happens During the Final Inspection?
After the panels are in, our crew completes a final walk-through with you.
- We operate every module and confirm smooth travel and soft-close.
- We check gaskets, gaps, thresholds, and door locks.
- We test the sweeping and the threshold drain.
- We hand over the warranty paperwork and care instructions.
If anything feels wrong, we correct it before the team leaves.
What Is the Warranty After Installation?
Our aluminum patio doors include a lifetime frame and panel warranty, a 10-year finish and glass warranty, and a one-year labor warranty on the install.
- Lifetime warranty on frames and panels.
- 10-year coverage on glass and finish.
- One-year labor on the installation.
The same company stands behind both the door and the work.
What About Installation for a Bifold or Lift-and-Slide System?
Multi-panel systems need more care on the floor, track, and alignment, so we treat them as two-day installs. A wide lift-and-slide or a bifold with several leaves is measured in millimeters.
- A bifold with multiple leaves is installed and tested one fold at a time.
- A lift-and-slide panel is set on its track and checked along the stacking run.
- Corner and stack openings are squared before the weather seal goes on.
Each system rides on bifold door track systems we specify to the door’s weight.
How Do I Prepare Before Installation Day?
Clear a path to the opening and keep the area inside available.
- Clear a path from the delivery point to the opening.
- Move furniture and rugs away from the door wall.
- Have an adult home for the walk-through and inspection.
We handle permits, weatherproofing, and disposal of the old door.
Does Love That Door Handle Installation Outside DFW?
Love That Door®
We manufacture and install across the wider North Texas region out of our four DFW locations. Use the aluminum patio doors buyers guide to confirm your opening, then schedule a free consultation and our team confirms the install date.
Schedule your free consultation at one of our 4 DFW showrooms today.
Expert Insight
From Chad Crenshaw, Founder & Chief Engineer:
“I’ve seen homeowners spend $15,000 on a patio door and get it installed by a handyman with a tube of silicone. That door will fail — not because of the product, but because nobody who understood it was there when it went in. We build the door and we install the door. Same team, same standard.”
Book your FREE in-home or showroom consultation today—we'll measure your space, explore custom designs, and bring your vision to life!
Get a FREE quote! Share your measurements or a photo of your space, and our design experts will send you a personalized price estimate.
Frequently Asked
Questions
01.
Q: Do you remove the old door and frame during installation?
A: Yes. Our crew removes and disposes of the old door and frame, repairs the rough opening if needed, then sets the aluminum patio door.
02.
Q: Is the building permit part of the service?
A: Yes. We pull the permit, schedule the inspection, and close it out as part of our full turnkey DFW installation service.
03.
Q: How long does an aluminum patio door installation take?
A: A standard door fits in one day; large bifold and lift-and-slide systems run one to two days.
04.
Q: What warranty comes with an installed door?
A: You get a lifetime warranty on frames and panels, a 10-year finish and glass warranty, and a one-year labor warranty on the install.
05.
Q: Is a pre-installation inspection required?
A: Yes. Measurement and city review confirm the opening is ready so the hardware operates correctly.
06.
Q: Do you complete a final walk-through?
A: Yes. We verify operation, sealing, thresholds, and hardware before the crew leaves.
Book your FREE in-home or showroom consultation today—we'll measure your space, explore custom designs, and bring your vision to life!
Get a FREE quote! Share your measurements or a photo of your space, and our design experts will send you a personalized price estimate.
Get a free quote
REQUEST A QUOTE
Ready to Elevate Your Home with Custom Doors and Windows?
Fill out your contact details and let our design experts guide you through the process:
- Free in-home consultation tailored to your needs.
- Rough measurements and custom design for a perfect fit.